CC2500 WALK BEHIND SAW

Delivers the Power of a Large Saw with the Compact Style of a Small Saw!

Your choice of power options:

CC2500 Walk Behind Saw

  • Choice of 14", 20" or 26" blade capacity
  • 10-3/8" maximum cutting depth with 26" guard
  • Economical screw feed raise and lower system standard or power raise and lower assembly is optional
  • Hydraulic raise and lower system offered
  • Positive gear drive to rear axle via Eaton hydrostatic transmission
  • High strength 3/16" steel box frame with heavy bar reinforcement makes Core Cut saws the strongest in the industry
  • Variety of gas, diesel, electric or hydraulic engine options up to 27 horsepower

Operator Manual

Parts List
CC2500 Specifications
Maximum Cutting Depth 10-3/8"
Blade Shaft Diameter 1-1/2"
Arbor Diameter 1" with drive pin
Blade Shaft Bearings Self-aligning pillow block ball
Blade Shaft Drive 4 belt through 25HP, 5 belt for 27HP
Blade Mounting Right or left
Blade Raise and Lower Precision ACME screw feed standard, power raise/lower assemble optional
Blade Coolant Dual multi-spray tubes
Blade Guard Attachment Slip-on
Front Wheel Dimensions 6" x 2" x 1"
Rear Wheel Dimensions 8" x 2" x 1"
Handle Bars Tilt, 2 position
Transmission Eaton Model 6
Drive Speed 0-130 feet per minute
Fuel Capacity 5 gallons
Electric Start Standard
Tach/Hour Meter Standard
Low Oil Alert Standard
Cutting Depth Indicator Standard
Quick Disconnect Flanges Standard
Frame Lift Standard
CC2500 Dimensions
Saw Height 47-1/2"
Minimum Length Pointer Up, Handle In 47-1/2"
Maximum Length Pointer Down, Handle Out 107-1/2"
Handle Extension 24"
Frame Width 20"
Frame Length 38"
Saw Width 26-1/2"
Front Axle Center Length 15-1/2"
Rear Axle Center Length 17-3/4"
Wheel Base Length 20"
Blade Shaft Maximum Height 14-1/2"