DS175 HAND HELD POLISHER

DS175
  • Grinds, hones, polishes and cleans steps, counter tops, floor edges and hard to reach areas.
  • Scratch removal, surface restoration or preparation is fast, easy and perfectly flat.
  • Three discs spin as they rotate around the center at the same speed as the driver.
  • Driven by a variable speed Makita power unit operating at 2500 to 4700 rpm.  Drive unit may be attached over the platform or outside the platform to reach under toe kicks.
  • System may be used wet with a slurry skirt (use a GFI) or dry.  A vacuum port is provided.

 

DS175 Specifications
Part Number 5800977
Catalog Number 47008
Driver Speed 0 to 5000 RPM, maximum
Platen Speed 0 to 5000 RPM, maximum
Platform Speed 0 to 830 RPM
Spindle Required 5/8-11 or 14-2 mm
Tool Size 7"
Weight 13 lbs.
DS 175 Includes: Power unit, handle, tool support assembly, vacuum port, velcro slurry skirt and coolant feed.

   

3" Resin Polishing Pads (7 STEP PROCESS)
STEP #

Description - Grit Size

 Part # CAT # Finish
1 3" Wet 50 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC30053PK 47387 Heavy material removal
2 3" Wet 100 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC30103PK 47394 Medium removal
3 3" Wet 200 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC30203PK 47446 Fine grinding, skin removal
4 3" Wet 400 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC30403PK 47458 Fine honing
5 3" Wet 800 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC30803PK 47459 Beginning polish
6 3" Wet 1500 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC31503PK 47397 Gloss
7 3" Wet 3000 Grit Heavy Duty Resin Polishing Pad (set of 3) AS-DPC33003PK 47408 Mirror finish