CC120 DEEP CUT SAW

The Very Powerful V-6 Saw That Cuts Up To 25-3/4" Deep

Power options:

CC120 Deep Cut Saw

  • Powerful V6 4.3L GM industrial engine

  • Maximum 66" blade capacity

  • Maximum cutting depth of 25-3/4"

  • Aluminum radiator with mechanical fan

  • 6-bolt blade collars with safety hub

  • Outboard bearing support

  • Large sheave torque acceleration

  • Mechanical governor

  • Blade shaft RPM 833

  • Hydrostatic transmission chain drive

Operator Manual & Parts List
CC120 Deep Cut Specifications

Weight (uncrated)

2,550 lbs.
Blade Shaft Diameter 2-1/2" 
Maximum Depth of Cut 25-3/4"
Arbor Diameter 1" (no drive pin hole)
Blade Shaft Bearings Self-aligning double concave roller
Blade Shaft Drive 5 V-belts jackshaft poly chain to blade shaft
Blade Mounting Right or left
Blade Raise and Lower Electro-hydraulic pump
Blade Coolant Dual multi-spray tubes
Blade Guard Attachment Bolt-on
Front Wheel Dimensions 10" x 3" x 1"
Rear Wheel Dimensions 12" x 3" x 1-1/4"
Handle Bars Tilt
Transmission Sundstrand
Drive Speed 0-200 Feet per minute
Air Filter 2 stage
Fuel Capacity 9 gallons
Electric Start Standard
Gauges Tachometer, oil pressure, water temp, vacuum, volts and hour meter
CC120 Dimensions
Saw Height 53"
Minimum Length Pointer Up, Handle In 62"
Maximum Length Pointer Down, Handle Out 144"
Handle Extension 24"
Frame Width 30"
Frame Length 50"
Saw Width 36"
Front Axle Center Length 21-3/4"
Rear Axle Center Length 24-1/2"
Wheel Base Length 23-7/8"