CC120 HP SLAB SAW

120 HP of Cutting Power in a Compact Frame

CC-120-SS Slab Saw

  • Powerful V6 4.3L industrial engine
  • Maximum cutting depth of 14-3/4"
  • Standard 36" blade guard
  • Blade shaft RPM 1850
  • Outboard bearing support
  • Mechanical governor
  • 4 pin collars, standard 1" arbor
  • Break-away sheave on the jackshaft that saves belts and chains

Operator Manual & Parts List

 
CC-120-SS Specifications
Uncrated Weight 2,150 lbs.
Blade Shaft Diameter 2"
Maximum Depth of Cut 14-3/4"
Arbor Diameter 1" with 4 drive pin collars
Blade Shaft Bearings Self-aligning double concave roller
Blade Shaft Drive 5 V-belts jackshaft polychain to blade shaft
Blade Mounting right or left
Blade Raise and Lower Electro-hydraulic pump
Blade Coolant Dual multi-spray tubes
Blade Guard Attachments Bolt-on 24", 30" or 36"
Front Wheel Dimensions 10" x 3" x 1"
Rear Wheel Dimensions 12" x 3" x 1-1/4"
Handle Bars Tilt
Transmission Sundstrand
Drive Speed 0-200 feet per minute
Air Filter 2 stage
Fuel Capacity 9 gallons
Electric Start Standard
Gauges Tachometer, oil pressure, water temp, vacuum, volts and hour meter
Light Bar Optional
CC-120-SS Dimensions
Saw Height 53"
Minimum Length Pointer Up, Handle In 62"
Maximum Length Pointer Down, Handle Out 124"
Handle Extension 24"
Frame Width 30"
Frame Length 50"
Saw Width 36"
Front Axle Center Length 21-3/4"
Rear Axle Center Length 24-1/2"
Wheel Base Length 23-7/8"