CC3700 WALK BEHIND SAW

Compact Saw That Fits Through a 30" Door!

Your choice of power options:

 

CC3700 Walk Behind Saw

  • 14" through 36" blade capacity

  • One hand sawing control

  • Forward-positioned motor for more weight at the blade and less at the operator

  • Available with 30 HP Deutz diesel engine and 25HP, 30HP or 40HP electric motors

  • Eaton transmission

  • Frame designed for the higher torque of a large horsepower engine, but more compact than the CC6500 saw

 

Operator Manual

Parts List
   
CC3700 Specifications
Maximum Depth of Cut 14-2/4"
Blade Shaft Diameter 1-3/4"
Arbor Diameter 1" with single drive pin
Blade Shaft Bearings Self-aligning double concave roller
Blade Shaft Drive 6 or 8 belt
Blade Mounting Left or right
Blade Raise and Lower Electro-hydraulic pump
Blade Coolant Dual multi-spray tubes
Blade Guard Attachment Slip-on through 30", Bolt-on 36"
Front Wheel Dimensions 8" x 3" x 1"
Rear Wheel Dimensions 10" x 3" x 1-1/4"
Handle Bars Tilt
Transmission Eaton Model 10
Drive Speed 0-200 feet per minute
Air Filter 4-stage
Fuel Capacity 6 gallons
Electric Start Standard
High Temperature Shut-off Standard
Hour Meter Standard
Tachometer Optional
Amp Meter Standard
Cutting Depth Indicator Standard
Quick Disconnect Blade Flanges Standard
Frame Lift Standard
Quick Release Rear Wheels Standard
Telescoping Front Pointer Standard
CC3700 Dimensions
Saw Height 49"
Min Length Pointer Up, Handle In 59"
Max Length Pointer Down, Handle Out 116"
Handle Extension 24"
Frame Width 25-3/4"
Frame Length 46"
Saw Width 32-1/4"
Front Axle Center Length 19-7/8"
Rear Axle Center Length 22-5/8"
Wheel base Length 21-3/8"
Blade Shaft Max Height 19-1/2"