CC4144D REAR DIFFERENTIAL SAW

 CC4144D Rear Differential Saw
  • Kubota liquid cooled turbo 44 HP Diesel
  • 1-11/16" diameter dual row tapered roller bearing with split housing
  • 1-11/16" diameter blade shaft with quick change collars
  • Rotary handle mounts permit infinite positioning of handle bars without removing handles
  • Custom built 6-row radiator
  • Hinged rear cover allow for easy access to the battery and transmission components
  • Hinged instrument panel allows for easy access to the electronics and the radiator fill cap

Operator Manual

Parts List

CC4144D Specifications
Frame Components
1/4" Thick Base Plate & Frame Rails
3/16" Thick Upright Side Panels
10" x 3" Rear Wheels Secured with Trantorque Bushings
6" x 2" Front Roller Bearing Wheels
Blade Drive
6 Groove 3V Cross Section Sheaves
(2) 3 Groove Banded Belts
Engine and Related Components
Belt Driven High Output 10" Diameter Fan Running @ 4000 RPM
Sucker Fan draws air through radiator from the cleaner side of the saw and discharges at the right side of saw
Radiator is totally shrouded and ducted through 10" diameter flex hose
Air cleaner is a linear design with the turbo pre-cleaner in line instead of the standard 90-degree - less restriction and increased efficiency
Linear slide belt tension method with large 3/4" Acme thread for easy adjustment
Wheel Drive
Proven Peerless Differential with Eaton transmission
Prositraction is provided via friction from large 2" diameter cold formed splines for maximum traction without tire damage
Mechanical positraction incorporates a turnbuckle coupling nut for quick fine tension adjustment
Controls
Single lever - cable operated friction speed controller with integrated raise and lower buttons
Easy access lowering speed hydraulic control valve
Water valve mounted next to speed control for easy access
Depth indicator is easily accessed for use and maintenance
Electronic water temperature is standard
Engine tachometer is standard