CC6560XLS
61 HP TURBO DIESEL SAW
|
CC6560XLS Saw
|
|
CC6560XLS Specifications |
| Maximum Depth of Cut: 14-3/4" |
| Blade Shaft Diameter: 1-3/4" |
| Arbor Diameter: 1" with single drive pin |
| Blade Shaft Bearings: Self-aligning double concave roller |
| Blade Shaft Drive: 10 belt |
| Blade Mounting: right or left |
| Blade Raise and Lower: Electro-hydraulic pump |
| Blade Coolant: Dual multi-spray tubes |
| Blade Guard Attachment: Slip-on through 30", Bolt on 36 |
| Front Wheel Dimensions: 8" x 3" x 1" |
| Rear Wheel Dimensions: 10" x 3" x 1-1/4" |
| Handle Bars: Tilt |
| Transmission: Sundstrand-Sauer or Eaton Model 10 |
| Drive Speed: 0-200 feet per minute |
| Air Filter: 4 stage |
| Fuel Capacity: 9 gallons |
| Electric Start: Standard |
| High Temperature Shut-Off: Gauge and Warning Light |
| Low Oil Alert: Warning Light |
| Hour Meter: Standard |
| Tachometer: Standard |
| Amp Meter: Warning Light |
| Cutting Depth Indicator: Standard |
| Quick Disconnect Blade Flanges: Standard |
| Frame Lift: Standard |
| Quick Release Rear Wheels: Standard |
|
CC6560XLS Dimensions |
|
| Saw Height | 63" |
| Min Length Pointer Up, Handle In | 60" |
| Max Length Pointer Down, Handle Out | 124" |
| Handle Extension | 24" |
| Frame Width (rear) | 27-5/8" |
| Frame Width (front) | 31-1/4" |
| Frame Length | 49-1/2" |
| Saw Width | 37-1/8" |
| Front Axle Center Length | 21-3/4" |
| Rear Axle Center Length | 24-1/2" |
| Wheel Base Length | 23-7/8" |
| Blade Shaft Max Height | 19-1/2" |
