CC6560XLT 2-SPEED, DUAL SHAFT SAW

The only saw on the market offering 20-42" blade speeds without a gear box!

 

CC6560XLT Saw

Never worry about which saw to bring to the job!

  • The 61 HP diesel-powered CC6560XLT is identical to our proven C6560XLS saw except for the additional blade shaft
  • Increased saw production on every job
  • 2 blade shafts for your choice of cutting speed and blade size
  • 10 belts for the faster shaft, 16 belts drive the slower shaft
  • Maximum cutting depth 17-3/4" with 42" blade
  • Long belt life due to a protective metal cover
  • Fuel efficient 61 HP turbo diesel engine

Operator Manual

Parts List
10 belt drive the rear (fast) shaft

16 belt drive the front (slow) shaft

 Change speeds simply by utilizing either the fast or the slow blade shaft (spacer provides clearance to the inactive flange). Extra long belt life thanks to protective metal cover.

CC6560XLT Specifications
Maximum Depth of Cut: 17-3/4"
Blade Shaft Diameter: 1-3/4"
Arbor Diameter: 1" with single drive pin
Blade Shaft Bearings: Self-aligning double concave roller
Blade Shaft Drive: 10 belt primary, 16 belt secondary
Blade Mounting: right or left
Blade Raise and Lower: Electro-hydraulic pump
Blade Coolant: Dual multi-spray tubes
Blade Guard Attachment: Slip-on through 30", Bolt on 36
Front Wheel Dimensions: 8" x 3" x 1"
Rear Wheel Dimensions: 10" x 3" x 1-1/4"
Handle Bars: Tilt
Transmission: Sundstrand-Sauer or Eaton Model 10
Drive Speed: 0-200 feet per minute
Air Filter: 4 stage
Fuel Capacity: 9 gallons
Electric Start: Standard
High Temperature Shut-Off: Gauge and Warning Light
Low Oil Alert: Warning Light
Hour Meter: Standard
Tachometer: Dual reading tach. with switch - Standard
Amp Meter: Warning Light
Cutting Depth Indicator: Standard
Quick Disconnect Blade Flanges: Standard
Frame Lift: Standard
Quick Release Rear Wheels: Standard

CC6560XLT Dimensions
Saw Height 63"
Min Length Pointer Up, Handle In 60"
Max Length Pointer Down, Handle Out 124"
Handle Extension 24"
Frame Width (rear) 27-5/8"
Frame Width (front) 31-1/4"
Frame Length 49-1/2"
Saw Width 37-1/8"
Front Axle Center Length 21-3/4"
Rear Axle Center Length 24-1/2"
Wheel Base Length 23-7/8"
Blade Shaft Max Height 19-1/2"