CC7200 DEEP-CUT SAW

Your choice of power options:

CC7200 Saw

  • Available with 78 HP diesel, 65 HP gas or 50 HP electric engines
  • 54" maximum blade capacity
  • 22-3/4" cutting depth
  • Jackshaft design for high torque, lower RPM requirements for deep sawing with large blades
  • Strongest frame in the industry
  • Forward-positioned motor for more weight at the blade

Operator Manual

Parts List
CC7200 Specifications
Maximum Depth of Cut 22-3/4"
Blade Shaft Diameter 1-3/4"
Arbor Diameter 1" with single drive pin
Blade Shaft Bearings Self-aligned double concave roller
Blade Shaft Drive 16 belt jackshaft, 10 belt engine
Blade Mounting right or left
Blade Raise and Lower Electro-hydraulic pump
Blade Coolant Dual multi-spray tubes
Blade Guard Attachment Slip-on through 30" guard, bolt-on 36" and up
Front Wheel Dimensions 8" x 3" x 1"
Rear Wheel Dimensions 10" x 3" x 1-1/4"
Handle Bars Tilt
Transmission Eaton Model 10
Drive Speed 0-200 feet per minute
Air Filter 4 stage
Fuel Capacity 9 gallons
Electric Start Standard
High Temperature Shut-Off Gauge and warning light
Low Oil Alert Warning light
Hour Meter Standard
Tachometer Standard
Amp Meter Warning light
Cutting Depth Indicator Standard
Quick Disconnect Blade Flanges Standard
Quick Release Rear Wheels Standard

CC7200 Dimensions
Saw Height 63"
Minimum Length Pointer Up, Handle In 70"
Maximum Length Point Down, Handle Out 135"
Handle Extension 24"
Frame Width (Rear) 27-5/8"
Frame Width (Front) 37"
Frame Length 60"
Saw Width 43-1/4"
Front Axle Cneter Length 31"
Rear Axle Center Length 24-1/2"
Wheel Base Length 25-3/8"
Blade Shaft Maximum Height 28-1/2"