HYDRAULIC POWER UNITS

CB70DT  CB50E  CB65W  CB55DLPXL & CB55DHPXL  RD-S2  CB40EXL & CB40EHPXL  CB30EXL CB24H

CB150  CB15E  CB9500


CB70DT - Trailer Mounted
  • 68 HP Yanmar, 4 cylinder diesel engine
  • Water cooled, electric starter
  • Max GPM: 28 gpm
  • Max PSI: 2,800 psi
  • Flow Control: pressure compensated
  • Hydraulic Tank Capacity: 40 gallon
  • Fuel Tank Capacity: 17 gallons
  • Hose: 100' x 3/4"
  • Dimensions: 110" x 72" x 60"
  • Weight: 2,900 lbs.

Parts List


 

CB50E

  • Complete variable flow from 0 to 22 gpm at 500 to 3900 psi for saw motor
  • Operator can easily adjust flow output of the saw motor from adjustments on the remote
  • Delivers 4 gpm at 150 to 2300 psi for travel and blade depth functions
  • Can be used for either a wall saw or hand saw by setting the selector switch in either hand or wall saw mode
  • Automatic out of phase electrical protection
  • Auto motor shut off if the temperature gets too high, the water is turned off or if the motor current is too high
  • No drive belts to wear out - all direct driven
  • Computer controlled that monitors operation and will blink fault codes for easy diagnostics.  Does not allow oil flow output during start up until all the adjustments are correct

CB65W
  • 65 HP Wisconsin, 4 cylinder gas engine
  • Air Cooled, electric starter
  • Max GPM: 25.5 gpm
  • Max PSI: 2,600 psi
  • Flow Control: pressure compensated
  • Hydraulic Tank Capacity: 50 gallon
  • Fuel Tank Capacity: 11 gallon
  • Hose 60' x 3/4"
  • Dimensions: 49" x 30" x 52"
  • Weight: 1,300 lbs.

CB55DLPXL & CB55DHPXL

CB55DLPXL

  • 55 HP Yanmar, turbo diesel
  • 2.0 liter water cooled engine, electric start
  • Max GPM: 25 gpm
  • Max PSI: 2,900 psi
  • Secondary outlet 2 gpm, 1,500 psi
  • Flow Control: pressure compensated
  • Hydraulic Tank Capacity: 50 gallon
  • Hose: 60' x 3/4"
  • Dimensions: 59" x 33" x 46"
  • Weight: 1,400 lbs.
CB55DHPXL
  • 55 HP Yanmar, turbo diesel
  • Max GPM: 20 gpm
  • Max PSI: 3,600 psi
  • Dimensions: 59" x 33" x 46"
  • Weight: 1,400 lbs.

RD-S2 with Remote Control

  • 40 HP Electric 4-speed
  • Motor: Electric 460V 3PH, 50 HP
  • Pump Type: Gear (4 internal gear pumps)
  • Hydraulic Data: 
    • 1st - 12 gpm @ 2300 psi
    • 2nd - 15 gpm @ 3700 psi
    • 3rd - 18 gpm @ 3400 psi
    • 4th - 22 gpm @ 2800 psi
  • Standard Hose: 7 pc. 27' from pump to saw
  • 30' remote cable
  • Heat Exchange: water/oil
  • Hydraulic Tank Capacity: 2.7 gallons
  • Dimensions: 28" L x 33" H x 22" W
  • Weight: 580 lbs.

CB40EXL, CB40EHPXL & CB30EXL

CB40EXL

  • 40 HP electric
  • Max GPM: 28 gpm
  • Max PSI: 2,500 psi
  • Flow Control: pressure compensated
  • Hydraulic Tank Capacity: 50 gallon
  • Hose: 60' x 3/4"
  • Dimensions: 49" x 30" x 52"
  • Weight: 1,220 lbs.

CB40EHPXL

  • 40 HP electric
  • Max GPM: 20 gpm
  • Max PSI: 3,600 psi
  • Hydraulic Tank Capacity: 50 gallon
  • Hose: 60' x 3/4"
  • Weight: 1,220 lbs.

CB30EXL

  • 30 HP electric 230 or 460 volt
  • Max GPM: 21 gpm
  • Max PSI: 2,500 psi
  • Flow Control: pressure compensated
  • Hydraulic Tank Capacity: 50 gallon
  • Hose: 60' x 3/4"
  • Dimensions: 49" x 30" x 40"
  • Weight: 1,200 lbs.

CB24HXL
  • 20.5 HP GX670 Honda, 2 cylinder gas engine
  • Water cooled, electric starter
  • 8 gpm @ 2500 psi, 12 gpm @ 2500 psi (14 gpm max)
  • Hydraulic Tank Capacity: 10 gallon
  • Fuel Tank Capacity: 5 gallon
  • Hose: 25' x 5/8" or 25' x 1/2"
  • 1/2" or 5/8" quick disconnects standard
  • Dimensions: 48" x 26" x 52"
  • Weight: 400 lbs.

Parts List


CB150
  • 15 HP electric motor - choice of 230V, 460V, 575V
  • Available with 1/2" or 5/8" hoses x 25 foot long
  • 8-12 GPM @ 2100 psi
  • 12 gallon hydraulic tank capacity
  • Weight: 445 lbs.

Parts List


CB15XL
  • 15 HP, 3 PH Baldor electric engine
  • 12 gpm @ 2200 psi
  • Hydraulic Tank Capacity: 10 gallon
  • Fuel Tank Capacity: 5 gallon
  • Flow Control: hydraulic manifold
  • Hose: 25' x 1/2" or 25' x 5/8"
  • 1/2" and 3/4" quick disconnects standard
  • Dimensions: 48" x 25" x 32"
  • Weight: 400 lbs.

Parts List


CB9500 Generators

230 Volt Model

  • 20 HP Honda motor
  • 230 Volt, 3 Phase
  • Fold in carrying handles and wheels
  • Hour meter, volt meter
  • Max. Power - 3 PH: 12 kva
  • Continuous Power 3 PH: 9500 watts
  • Max Power 1 PH 115V: 3450 watts
  • Max Power 1 PH 230V: 6900 watts
  • Dimensions: 31" x 36" x 33" (49" length with handles extended)
  • Weight: 345 lbs.

460 Volt Model

  • 20 HP Honda Motor
  • 460 Volt, 3 Phase
  • Fold in carrying handles and wheels
  • Hour meter, volt meter
  • Max Power - 3 PH: 12 kva
  • Continuous Power - 3 PH: 9500 watts
  • Max Power 1 PH 132V: 3450 watts
  • Max Power 1 PH 264V: 6900 watts
  • Dimensions: 31" x 36" x 33" (49" length with handles extended)
  • Weight: 345 lbs.