PC6000EC Highway Grinder
 |
|
The Revolutionary PC6000EC Highway Grinder Proven and patented closed loop control comes to the field of highway diamond grinding. Built on the standard PC-6000 platform, the PC-6000EC adds full electronic control and instrumentation, as well as advanced features such as data logging and electronic blade measurement. Sensors located around the machine constantly monitor operating conditions and adjust forward travel speed to optimize productivity. A full industrial computer acts as an operator interface for the machine allowing the operator to monitor conditions and adjust set points as needed. |
Computer's
Features That Deliver Total Control:
|
| Through a series of custom designed screens, the operator can manipulate machine operation, measure head wear and calculate production. | Blades are measured automatically. The blade report will show not only the blade wear but will also calculate the amount of square yards ground and cubic yards or removal. For the first time ever accurate blade costs are possible | Automatically generated reports track daily production as well as complete job production data. |
|
SPECIFICATIONS Dimensions: Length: 47', Width: 8'6", Height: 11' |
||
|
Weight: 53,000 lbs. with grinding head and fuel tank full. 75,000 lbs with water tank full. |
||
| Transportation: Machine is a legal load (with water tank empty) for standard 3-axle tractor. Axle loads are approximately 25,000 lbs. on trailer tandem and 25,000 lbs. on tractor tandem. No permits required. Standard light and air connections. | ||
| Power: 680 HP QSX15-630 Cummins diesel engine, liquid cooled. | ||
| Cutting Width: 50" maximum | ||
| Blade Diameter: 14", 16" or 18" | ||
| Fuel Capacity: 450 gallons (tank supplies both main and auxiliary engines). | ||
| Fuel Consumption: 22-25 gph (main engine). | ||